Use this degrees to arcseconds converter to change a degree measurement into its arcsecond equivalent. Enter a number in the calculator above and the result updates instantly.
Angle conversions are useful for geometry, trigonometry, navigation, surveying, machining, astronomy, and engineering drawings.
What is a degree?
A degree is an angle unit equal to 1/360 of a full turn. It is widely used in geometry, navigation, surveying, and everyday angle measurement.
What is an arcsecond?
An arcsecond is an angle unit equal to 1/60 of an arcminute. It is used for very small angles in astronomy, surveying, and optics.
Degrees to Arcseconds Converter formula
To convert degrees to arcseconds, use the formula below.
1 deg = 3,600 arcsec. This relationship is the conversion factor used by the calculator.
How to convert degrees to arcseconds
Start with the degree value, apply the formula, and round the result only after the calculation is complete.
Example: 10 deg = 36,000 arcsec.
- 1 deg = 3,600 arcsec
- 10 deg = 36,000 arcsec
- 100 deg = 360,000 arcsec
Manual conversion steps
- Write down the value in degrees.
- Use the conversion formula: arcseconds = degrees x 3,600.
- Calculate the result in arcseconds.
- Round the answer to the number of decimal places you need.
For quick checking, the converter above performs the same calculation automatically.
Common degrees to arcseconds use cases
This conversion is useful in practical situations where measurements need to move between different unit systems or audiences.
- Convert degrees to arcseconds when you need equivalent measurements in another unit.
Common mistakes when converting degrees to arcseconds
These are the most common issues to watch for when doing this conversion by hand.
- Do not mix up the direction of the conversion. degrees to arcseconds is not the same as arcseconds to degrees.
- Avoid rounding too early. Keep the full result during the calculation, then round the final answer.
Degrees to Arcseconds conversion table
| Degree | Arcsecond |
|---|---|
| 1 deg | 3,600 arcsec |
| 5 deg | 18,000 arcsec |
| 10 deg | 36,000 arcsec |
| 25 deg | 90,000 arcsec |
| 50 deg | 180,000 arcsec |
| 100 deg | 360,000 arcsec |
How to convert arcseconds to degrees
To reverse the conversion, switch the two units in the calculator or open the reverse conversion page: arcseconds to degrees.
Reversing the units is useful when you already have a value in arcseconds and need the equivalent value in degrees.
How to use this degrees to arcseconds converter
- Enter the number you want to convert in the value field.
- Confirm that the from unit is Degree and the to unit is Arcsecond.
- Read the converted result in the result box.
- Use the copy button if you want to paste the answer elsewhere.
Related angle conversions
More angle converters
More from Degree
More to Arcsecond
Popular angle pages
FAQ
What is the formula for degrees to arcseconds?
The formula is: arcseconds = degrees x 3,600.
How do I convert degrees to arcseconds by hand?
Write down the value in degrees, apply the formula, and round the final result in arcseconds.
How accurate is this converter?
The converter uses standard conversion factors and shows rounded results for readability.
Can I reverse the conversion?
Yes. Use the swap button in the converter or open the related reverse conversion page.
Why do results sometimes have many decimal places?
Some unit conversions do not produce short decimal values. Keep more decimal places for technical work, and round the answer for everyday use.